Just Got my Runner on the road and im trying to dial in the transmission. It will shift from 1st to 2nd at 2200-2300 rpm, then 3rd gear you really have to be cookin at over 3,000 rpm for it to got into 3rd gear. It also down shifts to soon in drive. Im running a new loakar kickdown cable. I didnt cut any off the cable and its adjusted for the most "slack " possible. There is no real slack in the cable but their is no tension so to speak either. I know on a GM the KD cable has slack until its almost wide open throttle.

I hope this can be an easy fix or atleast someone can point me in the right direction.