Quote:



man what a bummer

does it use a stock cap on it?

must be like one of the DUI dizzy I have seen

post back how it goes for ya with the old dizzy back in there

might want to take them up on it before the time expires on the meter...its beeping now

good luck





I checked the no 2 and it was good except for the
fact it is mashed under the wiper motor.... maybe
thats it but I did not see any misfire etc in a dark garage. Plug looked good and it fired the timing light ok when I hooked that up to it.

It runs fine with the old disty back in it. No
the cap is proprietary to the distributor. You would have to buy one from them for a replacement. Since the old one runs fine I am
sending the unit back to summit. They seem to
be fine with it since I did talk to Pertronix
tech and we came up with nothing. Who knows, it
could have been a bad mag on the tape.

Now I need to get my disty curved so it's not
as much of a slow advancing bone, and do some
slot welding so I can run with more advance.

Thanks all for your input.