Hdy lifters on a solid cam - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hdy lifters on a solid cam

Print Thread

Re: Hdy lifters on a solid cam [Re: Streetwize] #3216834 02/28/24 02:53 PM 02/28/24 02:53 PM
Joined: Jan 2004 Posts: 8,299 fredericksburg,va C cudaman1969 OP master
cudaman1969 OP master C Joined: Jan 2004 Posts: 8,299 fredericksburg,va	The flat tappet cams range from .490 to .580 lift so I’ll stick the smaller one in, set zero lash then see what happens. 4 speed car with 4.15 crank so no need to worry about vacuum loss at idle.

Entire Thread
Subject	Posted By	Posted
Hdy lifters on a solid cam	cudaman1969	02/26/24 03:35 PM
Re: Hdy lifters on a solid cam	Stanton	02/26/24 04:16 PM
Re: Hdy lifters on a solid cam	CSK	02/26/24 05:05 PM
Re: Hdy lifters on a solid cam	Stanton	02/27/24 03:19 AM
Re: Hdy lifters on a solid cam	CSK	02/27/24 04:44 AM
Re: Hdy lifters on a solid cam	turbobitt	02/27/24 10:16 AM
Re: Hdy lifters on a solid cam	fast68plymouth	02/27/24 03:57 PM
Re: Hdy lifters on a solid cam	Streetwize	02/27/24 04:44 PM
Re: Hdy lifters on a solid cam	Twostick	02/27/24 05:53 PM
Re: Hdy lifters on a solid cam	fast68plymouth	02/27/24 07:22 PM
Re: Hdy lifters on a solid cam	JohnRR	02/28/24 03:54 PM
Re: Hdy lifters on a solid cam	Streetwize	02/28/24 06:27 PM
Re: Hdy lifters on a solid cam	cudaman1969	02/28/24 06:53 PM
Re: Hdy lifters on a solid cam	JohnRR	02/26/24 05:23 PM
Re: Hdy lifters on a solid cam	cudaman1969	02/26/24 09:14 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1