Hdy lifters on a solid cam - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hdy lifters on a solid cam

Print Thread

Re: Hdy lifters on a solid cam [Re: cudaman1969] #3216323 02/26/24 01:05 PM 02/26/24 01:05 PM
Joined: Aug 2011 Posts: 2,866 Pattison Texas CSK master
CSK master Joined: Aug 2011 Posts: 2,866 Pattison Texas	also solids have a lash take up ramp that would cause the hydro lifter to not work properly , solid on hydro cam is fine if run very tight 1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5

Entire Thread
Subject	Posted By	Posted
Hdy lifters on a solid cam	cudaman1969	02/26/24 03:35 PM
Re: Hdy lifters on a solid cam	Stanton	02/26/24 04:16 PM
Re: Hdy lifters on a solid cam	CSK	02/26/24 05:05 PM
Re: Hdy lifters on a solid cam	Stanton	02/27/24 03:19 AM
Re: Hdy lifters on a solid cam	CSK	02/27/24 04:44 AM
Re: Hdy lifters on a solid cam	turbobitt	02/27/24 10:16 AM
Re: Hdy lifters on a solid cam	fast68plymouth	02/27/24 03:57 PM
Re: Hdy lifters on a solid cam	Streetwize	02/27/24 04:44 PM
Re: Hdy lifters on a solid cam	Twostick	02/27/24 05:53 PM
Re: Hdy lifters on a solid cam	fast68plymouth	02/27/24 07:22 PM
Re: Hdy lifters on a solid cam	JohnRR	02/28/24 03:54 PM
Re: Hdy lifters on a solid cam	Streetwize	02/28/24 06:27 PM
Re: Hdy lifters on a solid cam	cudaman1969	02/28/24 06:53 PM
Re: Hdy lifters on a solid cam	JohnRR	02/26/24 05:23 PM
Re: Hdy lifters on a solid cam	cudaman1969	02/26/24 09:14 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1