Hp 383-440 cam - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hp 383-440 cam

Print Thread

Re: Hp 383-440 cam [Re: Brad_Haak] #3213733 02/15/24 01:36 PM 02/15/24 01:36 PM
Joined: Jan 2004 Posts: 8,361 fredericksburg,va C cudaman1969 OP master
cudaman1969 OP master C Joined: Jan 2004 Posts: 8,361 fredericksburg,va	I checked it on lathe with dial indicator, comes up around 4.45 lift with 1.5 rocker, cam shows .0297

Entire Thread
Subject	Posted By	Posted
Hp 383-440 cam	cudaman1969	02/15/24 04:03 AM
Re: Hp 383-440 cam	Brad_Haak	02/15/24 02:14 PM
Re: Hp 383-440 cam	cudaman1969	02/15/24 05:36 PM
Re: Hp 383-440 cam	Brad_Haak	02/16/24 02:48 PM
Re: Hp 383-440 cam	cudaman1969	02/16/24 08:02 PM
Re: Hp 383-440 cam	Brad_Haak	02/16/24 08:23 PM
Re: Hp 383-440 cam	Cab_Burge	02/17/24 02:06 AM
Re: Hp 383-440 cam	cudaman1969	02/17/24 02:40 AM
Re: Hp 383-440 cam	jlatessa	02/17/24 04:39 AM
Re: Hp 383-440 cam	John_Kunkel	02/15/24 05:48 PM
Re: Hp 383-440 cam	cudaman1969	02/15/24 09:34 PM
Re: Hp 383-440 cam	Cab_Burge	02/16/24 07:00 AM
Re: Hp 383-440 cam	cudaman1969	02/16/24 02:43 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1