Originally Posted by madscientist

You can do it on a wheel dyno IF it’s not an inertia dyno. You need to be able to load the engine, steady state at WOT to develop your timing curve.


Disagree on that, can still get it close if not perfect on an inertia dyno as that's closer to it going down a track than zero rpm/sec acceleration.

Even if it was eddy current, no way it can hold it steady state at WOT with an automatic and looser converter. (without lockup)

Last edited by INTMD8; 11/28/23 06:44 PM.
69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 650rwhp @7250 510rwtq @5700