use the KB/silvolite high compression pistons, assuming 10.1 use the performer RPM (if it fits) or a good ol' holley street dominator.

For a mild stock converter (and assuming a hydraulic Flat tappet) and 3.23-3.55 gears use the Crower 32242 222/234 .496/.486 lift on 112 in at 107

For a hot street motor with a stick or 3000 stall and 3.91 or better gears, run the (Bullet) Ultradyne 231/239 @.050 .490/501 lift on 108 in at 102, this is a total badass cam for any hot street mopar without being too radical.