Upper rear shock spacers

Print Thread

Re: Upper rear shock spacers [Re: TJP] #3178150 09/25/23 04:57 PM 09/25/23 04:57 PM
Joined: Jun 2007 Posts: 1,182 clarks summit pa 73cuda340 OP super stock
73cuda340 OP super stock Joined: Jun 2007 Posts: 1,182 clarks summit pa	Originally Posted by TJP Originally Posted by 73cuda340 Originally Posted by moparx how much space is there ? common washers could be used if needed. a tip to install all these washers without them falling out. tie them to the shock with common sewing thread. two opposite pieces of thread will hold the assembly together while you install the retaining bolt. About 3/8" to 1/2" on each side even with the spacers installed on the top bolts I'm hoping you mean the R and L shock when you say each side Either way the gap needs to be filled. I'd be tempted to send them back myself Nope, that's on each side of the shock. The shocks are qa1 double adjustables. I called qa1 and they said the same as above, just add washers to take up the space. 1973 Cuda 528 all aluminum Hemi, 4 speed, 3.23 Sure-Grip, (JA5) Silver Frost Metallic 1973 Challenger Rallye 340 1985 W150 Power Ram prospector 1986 Camaro IROC-Z 305 tpi

Hop To