Originally Posted by TJP
Originally Posted by NITROUSN
I never liked that shove the probe into the hose method. Crude and rude to me.


iagree I would worry about the probe / wires eventually failing as well as leakage. One could easily use a TEE in the heater hose supply side. Another option that may be possible is to drill another port ahead of the factory temp sender depending on the size of probe and available material beer


iagree Terzmo the poster of this thread has a Hemi engine and needs to oil his wallet so it does not squeak when he pulls the 45 Washingtons out. The spacer is a neat way to get it done. My Mancini housing had extra ports. The factory housing or his housing might be able to be drilled and tapped.