Hemi bore on a fuel car is 4.187 or so. Cab is prolly building a 4.5 bore for what he's wanting to do. .
Your correct: up: I'm using aa Icon shelf piston on this KB block B1 headed 572 C.I. motor that I'm building for NOS. These Icon pistons have a raised dome along with heavier wall .990 wrist pins for the NOS so maybe those pistons are heavier than the smaller bore Hemi pistons weighed I'll try and use that crank and possibly rods on another wedge build later this year
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
