Figuring out pushrod length for roller cam

Print Thread

Re: Figuring out pushrod length for roller cam [Re: bigblk66_coronet] #3110442 01/09/23 09:48 PM 01/09/23 09:48 PM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	I mentioned, the pushrods should be about 8.5" so you could get the correct length checking pushrod.

Entire Thread
Subject	Posted By	Posted
Figuring out pushrod length for roller cam	bigblk66_coronet	12/26/22 11:39 PM
Re: Figuring out pushrod length for roller cam	Stanton	12/27/22 12:07 AM
Re: Figuring out pushrod length for roller cam	AndyF	12/27/22 01:13 AM
Re: Figuring out pushrod length for roller cam	Cab_Burge	12/27/22 02:03 AM
Re: Figuring out pushrod length for roller cam	INTMD8	12/27/22 03:33 AM
Re: Figuring out pushrod length for roller cam	carnut68	12/27/22 06:39 AM
Re: Figuring out pushrod length for roller cam	fastmark	12/27/22 11:46 AM
Re: Figuring out pushrod length for roller cam	W.I.N. Racing	12/27/22 04:20 PM
Re: Figuring out pushrod length for roller cam	bigblk66_coronet	12/30/22 01:56 AM
Re: Figuring out pushrod length for roller cam	340SIX	12/30/22 04:07 AM
Re: Figuring out pushrod length for roller cam	carnut68	12/30/22 01:08 PM
Re: Figuring out pushrod length for roller cam	UCUDANT	12/30/22 01:30 PM
Re: Figuring out pushrod length for roller cam	bigblk66_coronet	01/07/23 10:11 PM
Re: Figuring out pushrod length for roller cam	440_Offroader	01/08/23 04:28 PM
Re: Figuring out pushrod length for roller cam	451Mopar	01/10/23 01:48 AM
Re: Figuring out pushrod length for roller cam	Stanton	01/10/23 03:04 AM
Re: Figuring out pushrod length for roller cam	451Mopar	12/28/22 09:52 AM
Re: Figuring out pushrod length for roller cam	Hemi_Joel	12/28/22 06:42 PM
Re: Figuring out pushrod length for roller cam	BigDaddy440	12/28/22 11:18 PM
Re: Figuring out pushrod length for roller cam	RapidRobert	01/08/23 05:00 PM

Hop To