if i'm not mistaken, [not that i have EVER been before laugh2] those wheels have the basic 3" or slightly larger, center hole that most wheels have to fit a bunch of different hub sizes.
Mally, glad to see you got the right nutz coming. it's also a good idea to get the wheels in hand to measure the center hole for the hub-centric rings.
those center holes can vary quite a lot from brand to brand and style, so best to measure and see.
something to keep in mind about those rings. unless you get custom rings made, you might have to get rings that are "close", then chuck them up in the lathe to get them to size.
i have had to do that twice. not a hard job, but you have to watch tightening the lathe chuck so you don't deform the rings.
also, almost all of those rings are measured in mm, so you will have to figure out what size they are. [i'm not a mm fan. just too old to fiddle with the conversion math. biggrin]
beer

Last edited by moparx; 10/12/22 02:47 PM. Reason: forgot to mention mm info