Ya that’s what my initial thoughts were to do, put them back to stock and see. See when I tried to bring the rpm up it would just max out at 4500-5 and that’s it, so I thought it might be ignoring which is a 6AL with a 3 step, I pulled all 3 chips out of the 3 step and it would still stay max rpm at 45-5 so I unplugged the 3 step and it still did it.
The only reason I bought the 1350 was it was a good deal and the guy that built the motor said it will work, plus when we had it on the dyno the 1050 ran out of steam and the only other carb there was a 1475 ultra hp which was on a 605 hemi, so we tried it on mine with no additional tuning in that carb and it picked up 20hp so that’s one of the reasons I figured the 1350 would work. But the way it is now there’s no way I can use it.