Building a new race Dana 60 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Building a new race Dana 60

Print Thread

Re: Building a new race Dana 60 [Re: cudaman1969] #3019402 02/27/22 01:21 PM 02/27/22 01:21 PM
Joined: Oct 2006 Posts: 1,264 New York, USA Chargerfan68 OP pro stock
Chargerfan68 OP pro stock Joined: Oct 2006 Posts: 1,264 New York, USA	Originally Posted by cudaman1969 Unless you have a lot of room for tires I’d stick them under the car then measure from back of wheel flange to flange, let them figure it out. That’s exactly what I am going to do. I have that measurement. Then, once I receive all the parts in hand, I will confirm rverything before I cut and narrow tubes. Thx 1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.

Entire Thread
Subject	Posted By	Posted
Building a new race Dana 60	Chargerfan68	02/25/22 12:06 AM
Re: Building a new race Dana 60	68shifter	02/25/22 12:21 AM
Re: Building a new race Dana 60	Cab_Burge	02/25/22 06:49 AM
Re: Building a new race Dana 60	CMcAllister	02/25/22 04:49 PM
Re: Building a new race Dana 60	Chargerfan68	02/25/22 09:05 PM
Re: Building a new race Dana 60	Chargerfan68	02/25/22 09:01 PM
Re: Building a new race Dana 60	AndyF	02/25/22 09:04 PM
Re: Building a new race Dana 60	440lebaron	02/25/22 09:07 PM
Re: Building a new race Dana 60	Chargerfan68	02/25/22 09:13 PM
Re: Building a new race Dana 60	fbs63	02/27/22 01:58 PM
Re: Building a new race Dana 60	cudaman1969	02/27/22 03:37 PM
Re: Building a new race Dana 60	Chargerfan68	02/27/22 05:21 PM
Re: Building a new race Dana 60	6PKRTSE	02/27/22 09:52 PM
Re: Building a new race Dana 60	Chargerfan68	02/27/22 05:19 PM
Re: Building a new race Dana 60	Chargerfan68	02/25/22 09:11 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1