Building a new race Dana 60 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Building a new race Dana 60

Print Thread

Re: Building a new race Dana 60 [Re: fbs63] #3019400 02/27/22 01:19 PM 02/27/22 01:19 PM
Joined: Oct 2006 Posts: 1,264 New York, USA Chargerfan68 OP pro stock
Chargerfan68 OP pro stock Joined: Oct 2006 Posts: 1,264 New York, USA	Originally Posted by fbs63 Just an FYI on this subject. Strange has Mopar bolt pattern housing ends that take a 3.150 bearing so you can use 40 spline axles and still use existing brakes. Thx. I didn’t lnow that. But, I am starting from scratch with everything and will prob get the Strange pro race setup along with the axles. 1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.

Entire Thread
Subject	Posted By	Posted
Building a new race Dana 60	Chargerfan68	02/25/22 12:06 AM
Re: Building a new race Dana 60	68shifter	02/25/22 12:21 AM
Re: Building a new race Dana 60	Cab_Burge	02/25/22 06:49 AM
Re: Building a new race Dana 60	CMcAllister	02/25/22 04:49 PM
Re: Building a new race Dana 60	Chargerfan68	02/25/22 09:05 PM
Re: Building a new race Dana 60	Chargerfan68	02/25/22 09:01 PM
Re: Building a new race Dana 60	AndyF	02/25/22 09:04 PM
Re: Building a new race Dana 60	440lebaron	02/25/22 09:07 PM
Re: Building a new race Dana 60	Chargerfan68	02/25/22 09:13 PM
Re: Building a new race Dana 60	fbs63	02/27/22 01:58 PM
Re: Building a new race Dana 60	cudaman1969	02/27/22 03:37 PM
Re: Building a new race Dana 60	Chargerfan68	02/27/22 05:21 PM
Re: Building a new race Dana 60	6PKRTSE	02/27/22 09:52 PM
Re: Building a new race Dana 60	Chargerfan68	02/27/22 05:19 PM
Re: Building a new race Dana 60	Chargerfan68	02/25/22 09:11 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1