According to the description that kit works for a lot of cars and it should work for yours. I wouldn't be surprised to see it on later model trucks.

If you already have a latch on the seat you are getting, you would only need the passenger side spring.

Even better I would clamp the drivers side spring in a vice and bent the tip with pliers or a hammer. You just need the tip of the spring to point in the opposite direction and it would work fine. The spring is clamped between the lever and the seat hinge arm so it won't have to be super perfect. It's trapped and can't move out of place.


Most of my cars have either 70/71 B/E body buckets or the bench seats with the buttons mounted up high or I would send one from my spare parts. I only have the one set of 73/74 Buckets.