You are fortunate to even find replacement seals. Some vendors hold you up with non-serviced replacement parts.
(except by them, of course) In my experience there are few brand specific seals in the after market industry, most are "stock" type items. Its too costly to have a proprietary seal made based on cost vs volume of sales. When I disassembled the strut I measured the O rings and found the part number on the seal. I even ordered them from a less than cost effective place McMaster-Carr.
Last edited by W.I.N. racing; 01/18/22 06:20 PM.
'01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60
'01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust,
'05 Dodge Magnum R/T - Too Much to list
'60 Willys CJ5
'01 International LPX - Project,DT466, Allison
'64 Plymouth Valiant, Inj 528 Hemi, 2spd
| 
