Roller cams and max open degree's

Print Thread

Re: Roller cams and max open degree's [Re: mopar dave] #3005374 01/14/22 09:53 PM 01/14/22 09:53 PM
Joined: Jan 2003 Posts: 31,038 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,038 Oregon	It doesn't actually hold max lift for 10 degrees but it might look like that on your dial indicator, especially if you don't have the full spring load hooked up.

Entire Thread
Subject	Posted By	Posted
Roller cams and max open degree's	mopar dave	01/14/22 07:08 PM
Re: Roller cams and max open degree's	Diplomat360	01/14/22 10:40 PM
Re: Roller cams and max open degree's	AndyF	01/15/22 01:53 AM
Re: Roller cams and max open degree's	Cab_Burge	01/15/22 02:53 AM
Re: Roller cams and max open degree's	mopar dave	01/15/22 03:19 AM
Re: Roller cams and max open degree's	AndyF	01/15/22 05:14 AM
Re: Roller cams and max open degree's	mopar dave	01/15/22 01:42 PM
Re: Roller cams and max open degree's	Stanton	01/15/22 02:13 PM
Re: Roller cams and max open degree's	mopar dave	01/15/22 02:36 PM
Re: Roller cams and max open degree's	Diplomat360	01/15/22 02:43 PM
Re: Roller cams and max open degree's	mopar dave	01/15/22 03:26 PM
Re: Roller cams and max open degree's	AndyF	01/15/22 02:58 PM
Re: Roller cams and max open degree's	mopar dave	01/15/22 03:28 PM
Re: Roller cams and max open degree's	Stanton	01/15/22 04:14 PM
Re: Roller cams and max open degree's	mopar dave	01/15/22 04:32 PM
Re: Roller cams and max open degree's	GTS340	01/15/22 04:44 PM
Re: Roller cams and max open degree's	polyspheric	01/15/22 03:20 AM
Re: Roller cams and max open degree's	Diplomat360	01/15/22 03:39 AM
Re: Roller cams and max open degree's	mopar dave	01/15/22 03:48 AM
Re: Roller cams and max open degree's	polyspheric	01/15/22 06:22 PM
Re: Roller cams and max open degree's	Cab_Burge	01/15/22 07:25 PM
Re: Roller cams and max open degree's	polyspheric	01/15/22 08:04 PM

Hop To