Originally Posted by Cab_Burge
Originally Posted by MONC
Originally Posted by AARCONV
Its easy to tell if its the cover, remove it and check for wear...but then again it would of hit and make noise on 1st start up..its not like it bends later


Exactly, not sure why it was fine for half the trip and then suddenly start vibrating. It didn't look cracked or anything when we inspected it on the lift.
I'll get under there today and check it out, thanks.

I would remove the cover and look for a loose or missing converter bolt twocents scope


I removed the cover, didn't see any noticeable wear, and it wasn't cracked or anything.
I will check the converter bolts, good idea .


Mopar
Or
No
Car