Thanks all for the replies. I've been talking to a friend (both of us are so busy, but within the next week...), we'll get together and do what you mentioned. I'll try to answer some of your questions below and summarize what sounds like you recommended:
1.) Check eccentric bolts for movement and retorque...what is the pounds per square inch on these...anybody know what they should be torqued to? They were replaced/are new with new bushings.
2.) Check mounting tube lower control arm stud where it is connected to K-frame.
3.) Check cam brackets and bolts. (might need new cam bolt package...we'll see)
4.) Check nuts on control arms.
5.) I didn't replace the strut rod bushings.
6.) Frame rails and inner fenders = no rust/solid.
7.) Prior to replacing all the parts the tires were squealing all the time, straight and in turns. Now, some straight, but mostly in turns to the right, some to the left.
8.) Brakes aren't dragging.
Did I cover everything? If I missed something, let me know. Lot's of good advice, just trying to summarize. Thanks again for your help! We'll get to it and hopefully, will have success. Please feel free to continue to comment as I'll keep checking back. Thanks again!