Operation driver's side door/quarter glass: 69 Hemi Charger 500

Last night and today been working on the driver's side glass.. The door was easy-peasy, the quarter not so. Could NOT get the rear quarter glass aligned.. The top of the front was going too far inboard, no matter what I did. My friend Julius came over this morning to tweak things.. Sometimes it is best to get a different set of eyes.. Plus, J has restored a view Mopars in his day.. 😁

After doing this and doing that we both came to the conclusion that the new date-coded glass from my vendor had too much curvature at the top compared to the original. We placed the original in and after readjusting all we did to compensate for the bad glass it went up fine.. The glass... So I will contact ECS aboit this.. But did clean up the original glass and it was actually probably the best original. All the other glass is ECS. The passenger side is fine.

I left the vintage CAL CUSTOM decal that a previous owner installed during the early part of the car's life. Think it looks cool. I will leave it for now as long as that window stays in.

FB_IMG_1630979055263.jpgFB_IMG_1630979061214.jpgFB_IMG_1630979071808.jpgFB_IMG_1630979077340.jpg

Troy
Houston Mopar Connection Club
'69 Charger Daytona 440 - auto - 4.10 Dana (now with 426 hemi)
'69 Charger 500 440 - 4speed - 3.54 Dana
'70 Road Runner 383 - 4speed - a/c (now with 440)