Hey folks,
I have a problem with a very stiff clutch pedal. It's a 68 GTS 340 car with standard 833. The car did not have a stiff pedal before I restored it but afterward, it did. I've replaced the bellhousing with a factory correct housing and used dial idicator. Good there. Replaced clutch pressure plate and disc with brand new RAM 3 finger-style. I'm running the factory pedal box (rebuilt with all new bearings) and over-center spring. Still stiff pedal. The z-bar (Torque shaft) and the bellhousing Z bar mount are factory correct I believe (they look like what Brewers shows). Also the clutch pedal rod is factory correct I believe. When I look at the Z-bar though, it looks like the end-closed the bellhousing is not centered. Any ideas?