Using shaft and pushrod oiling

Print Thread

Re: Using shaft and pushrod oiling [Re: Pockets] #2927808 05/28/21 05:57 PM 05/28/21 05:57 PM
Joined: Jan 2003 Posts: 31,051 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,051 Oregon	You would need to talk to someone like Best Machine. It takes some special equipment to drill a straight hole that long thru a block. Not a DIY type of project.

Entire Thread
Subject	Posted By	Posted
Using shaft and pushrod oiling	Pockets	07/09/20 01:49 AM
Re: Using shaft and pushrod oiling	Cab_Burge	07/09/20 02:40 AM
Re: Using shaft and pushrod oiling	MR_P_BODY	07/09/20 02:40 AM
Re: Using shaft and pushrod oiling	dvw	07/09/20 10:25 AM
Re: Using shaft and pushrod oiling	fast68plymouth	07/09/20 09:05 PM
Re: Using shaft and pushrod oiling	Pockets	07/13/20 03:20 AM
Re: Using shaft and pushrod oiling	CSK	07/13/20 03:55 AM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 04:56 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 05:27 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 05:36 PM
Re: Using shaft and pushrod oiling	440Jim	05/28/21 06:24 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 07:06 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 07:18 PM
Re: Using shaft and pushrod oiling	AndyF	05/28/21 07:27 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 07:37 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 09:42 PM
Re: Using shaft and pushrod oiling	AndyF	05/28/21 09:57 PM

Hop To