Using shaft and pushrod oiling

Print Thread

Re: Using shaft and pushrod oiling [Re: MR_P_BODY] #2794596 07/09/20 06:25 AM 07/09/20 06:25 AM
Joined: Mar 2006 Posts: 9,863 MI, usa dvw master
dvw master Joined: Mar 2006 Posts: 9,863 MI, usa	.040" is as big as I would go. Many Indy heads oil through a single .040" orifice. My Indy -1 motor push rod oil's. With 16 .040" orifices and spray bars you may want to look at a high volume pump. Though my push rods are .055" if I did it over they would be smaller. Doug

Entire Thread
Subject	Posted By	Posted
Using shaft and pushrod oiling	Pockets	07/09/20 01:49 AM
Re: Using shaft and pushrod oiling	Cab_Burge	07/09/20 02:40 AM
Re: Using shaft and pushrod oiling	MR_P_BODY	07/09/20 02:40 AM
Re: Using shaft and pushrod oiling	dvw	07/09/20 10:25 AM
Re: Using shaft and pushrod oiling	fast68plymouth	07/09/20 09:05 PM
Re: Using shaft and pushrod oiling	Pockets	07/13/20 03:20 AM
Re: Using shaft and pushrod oiling	CSK	07/13/20 03:55 AM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 04:56 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 05:27 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 05:36 PM
Re: Using shaft and pushrod oiling	440Jim	05/28/21 06:24 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 07:06 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 07:18 PM
Re: Using shaft and pushrod oiling	AndyF	05/28/21 07:27 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 07:37 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 09:42 PM
Re: Using shaft and pushrod oiling	AndyF	05/28/21 09:57 PM

Hop To