Originally Posted by calrobb2000

hi

how much power should this hemi make ?

10.5 -1 comp

511 cu in 4.250 bore 4.5 stroke 7.100 rods

cam is a roller 236 / 244 @50 solid

mopar peform heads alu

2 625 e brock avs carbs inline stock intake

2" headers. thank you !

I've built similar motors that made above 600 HP after sorting out the aftermarket carbs. All the ones I built and dyno tested for customers that had the original street hemi carbs with similar parts all made above 600 HP with stock jetting up
Is your intake manifold stock? If so make sure and replace the right rear secondary jet(rear carb) with a .075 I.D or smaller tp start with, do NOT leave the stock jet in that carb tsk It will flood #8 cylinder, those intakes had similar jetting on all the stock street hemi carbs from the factory 1966 to 1971, they had either .065 or .063 in them stock scope

Last edited by Cab_Burge; 01/28/21 03:01 PM.

Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)