Machining Indy Maxx Block for 440 Mains

Print Thread

Re: Machining Indy Maxx Block for 440 Mains [Re: challenger451ci] #2864045 12/23/20 08:16 PM 12/23/20 08:16 PM
Joined: Jun 2004 Posts: 926 B birdtracker super stock
birdtracker super stock B Joined: Jun 2004 Posts: 926	call Ohio Crankshaft and ask for Chip. Tell him what you want. They have cranks in stock both 4.150 and 4.250 that will take alot of horsepower. 440 mains and they have King bearings.. Birdtracker

Entire Thread
Subject	Posted By	Posted
Machining Indy Maxx Block for 440 Mains	challenger451ci	12/19/20 10:24 PM
Re: Machining Indy Maxx Block for 440 Mains	birdtracker	12/20/20 12:51 AM
Re: Machining Indy Maxx Block for 440 Mains	fbs63	12/20/20 01:00 PM
Re: Machining Indy Maxx Block for 440 Mains	challenger451ci	12/20/20 02:10 PM
Re: Machining Indy Maxx Block for 440 Mains	TRENDZ	12/20/20 02:35 PM
Re: Machining Indy Maxx Block for 440 Mains	gregsdart	12/20/20 02:40 PM
Re: Machining Indy Maxx Block for 440 Mains	Cab_Burge	12/20/20 06:07 PM
Re: Machining Indy Maxx Block for 440 Mains	cudaman1969	12/20/20 11:04 PM
Re: Machining Indy Maxx Block for 440 Mains	cl440	12/20/20 11:16 PM
Re: Machining Indy Maxx Block for 440 Mains	Cab_Burge	12/21/20 12:39 AM
Re: Machining Indy Maxx Block for 440 Mains	challenger451ci	12/23/20 11:57 PM
Re: Machining Indy Maxx Block for 440 Mains	birdtracker	12/24/20 12:16 AM
Re: Machining Indy Maxx Block for 440 Mains	challenger451ci	12/24/20 05:05 AM
Re: Machining Indy Maxx Block for 440 Mains	birdtracker	12/24/20 01:10 PM
Re: Machining Indy Maxx Block for 440 Mains	challenger451ci	12/24/20 04:34 PM
Re: Machining Indy Maxx Block for 440 Mains	cudaman1969	12/24/20 05:38 PM
Re: Machining Indy Maxx Block for 440 Mains	rebel	12/24/20 12:17 AM

Hop To