Machining Indy Maxx Block for 440 Mains

Print Thread

Re: Machining Indy Maxx Block for 440 Mains [Re: birdtracker] #2862458 12/20/20 09:00 AM 12/20/20 09:00 AM
Joined: Nov 2003 Posts: 1,838 NW Indiana F fbs63 top fuel
fbs63 top fuel F Joined: Nov 2003 Posts: 1,838 NW Indiana	Yes its just a matter of line bore and hone. Make sure a competent shop does it.

Entire Thread
Subject	Posted By	Posted
Machining Indy Maxx Block for 440 Mains	challenger451ci	12/19/20 10:24 PM
Re: Machining Indy Maxx Block for 440 Mains	birdtracker	12/20/20 12:51 AM
Re: Machining Indy Maxx Block for 440 Mains	fbs63	12/20/20 01:00 PM
Re: Machining Indy Maxx Block for 440 Mains	challenger451ci	12/20/20 02:10 PM
Re: Machining Indy Maxx Block for 440 Mains	TRENDZ	12/20/20 02:35 PM
Re: Machining Indy Maxx Block for 440 Mains	gregsdart	12/20/20 02:40 PM
Re: Machining Indy Maxx Block for 440 Mains	Cab_Burge	12/20/20 06:07 PM
Re: Machining Indy Maxx Block for 440 Mains	cudaman1969	12/20/20 11:04 PM
Re: Machining Indy Maxx Block for 440 Mains	cl440	12/20/20 11:16 PM
Re: Machining Indy Maxx Block for 440 Mains	Cab_Burge	12/21/20 12:39 AM
Re: Machining Indy Maxx Block for 440 Mains	challenger451ci	12/23/20 11:57 PM
Re: Machining Indy Maxx Block for 440 Mains	birdtracker	12/24/20 12:16 AM
Re: Machining Indy Maxx Block for 440 Mains	challenger451ci	12/24/20 05:05 AM
Re: Machining Indy Maxx Block for 440 Mains	birdtracker	12/24/20 01:10 PM
Re: Machining Indy Maxx Block for 440 Mains	challenger451ci	12/24/20 04:34 PM
Re: Machining Indy Maxx Block for 440 Mains	cudaman1969	12/24/20 05:38 PM
Re: Machining Indy Maxx Block for 440 Mains	rebel	12/24/20 12:17 AM

Hop To