Originally Posted by AndyF
Originally Posted by 6PAX
[quote=AndyF][quote=6PAX]
Ok, so if I use the B-body assemblies including the B-body spindles, will there be any issues regarding the upper or lower control arms? These would be going on a 70 Dart which currently has sbp disks.


Yes there will be an issue with the upper control arm, the ball joint is too small on a '70.




dr. diff has ball joint adapters that will allow the small ball joint to fit the B-body spindle.
i used these on my buddy's 72 duster and they worked great !
beer