Originally Posted by carnut68
Originally Posted by GY3
Originally Posted by carnut68
I'm using standard port Indy Ezs prepped by Dwayne. Probably go with a solid roller. Pump gas low maintenence. Not looking for max hp. I have a collection of 3 intakes An M1, Torker II, TM7. I'd like to find An SD. Its going in an A body so it should interesting.


That's the great part of these. Very little maintenance if you go hydraulic roller. Plug checks and oil changes for me.
So you would recommend a hydraulic over a solid roller. What lifters do you use?


That all depends on what you are using it for. I used Howards hydraulic roller cam and lifters. Over 7000 miles so far and no issues.

'63 Dodge 330
11.19 @ 121 mph
Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.