Geez, been over a month already..........

BUT, its not like I'm working on it everyday. At this point, I've got about 7 hours into it.

I didn't buy the shrinking disc (yet) but I did buy the finest body working tool set Harbor Freight has to offer (re: the only one). I'm REAL close now. I'm not expecting perfection, but I want to use as little bondo as possible. The way it sits now, I should be able to get the window back in, but before I do that, I want to try to minimize the high and low spots on the roof. I may just try to slowly work with heating/cooling the areas.

This:



To this:



It's not as rough as it looks, my sanding didn't get off all five layers of paint. I made the window plug to not only close the back window, but to monitor the curve of the opening as I work the roof. I know if I used the actual glass I'd either drop it, or drop something on it.

Hopefully one more weekend.