Street/Strip aftermarket block. aluminum or cast iron?

Print Thread

Re: Street/Strip aftermarket block. aluminum or cast iron? [Re: DoubleD] #2768819 04/27/20 06:30 PM 04/27/20 06:30 PM
Joined: Dec 2012 Posts: 1,824 Wind Gap,Pa. S Sammy top fuel
Sammy top fuel S Joined: Dec 2012 Posts: 1,824 Wind Gap,Pa.	I'm at zero lash cold. Aluminum block and aluminum heads. On a cold spring morning starting it up, not one rev till I get to 110 degrees. Only idle time to warm it up. I do preheat the oil which helps very little but it is something.

Entire Thread
Subject	Posted By	Posted
Street/Strip aftermarket block. aluminum or cast iron?	GY3	04/24/20 09:04 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	polyspheric	04/24/20 09:29 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	tex013	04/24/20 10:51 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	Cab_Burge	04/24/20 11:45 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	GY3	04/25/20 03:22 AM
Re: Street/Strip aftermarket block. aluminum or cast iron?	Cab_Burge	04/25/20 04:59 AM
Re: Street/Strip aftermarket block. aluminum or cast iron?	n20mstr	04/25/20 02:04 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	GY3	04/25/20 02:11 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	n20mstr	04/25/20 02:21 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	fbs63	04/25/20 03:21 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	hemi-itis	04/25/20 03:46 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	racerx	04/26/20 04:48 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	n20mstr	04/26/20 07:40 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	racerx	04/27/20 04:24 AM
Re: Street/Strip aftermarket block. aluminum or cast iron?	n20mstr	04/26/20 07:41 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	GY3	04/25/20 07:29 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	Al_Alguire	04/25/20 07:35 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	AndyF	04/25/20 08:04 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	n20mstr	04/25/20 11:22 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	GY3	04/26/20 02:48 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	hemi-itis	04/26/20 05:37 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	73DAD	04/27/20 11:39 AM
Re: Street/Strip aftermarket block. aluminum or cast iron?	n20mstr	04/27/20 12:13 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	DaveRS23	04/27/20 12:45 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	GY3	04/27/20 02:38 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	RATTRAP	04/27/20 06:44 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	DoubleD	04/27/20 10:16 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	Sammy	04/27/20 10:30 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	polyspheric	04/28/20 12:37 AM
Re: Street/Strip aftermarket block. aluminum or cast iron?	Cab_Burge	04/28/20 02:40 AM
Re: Street/Strip aftermarket block. aluminum or cast iron?	Moparrob68	04/28/20 03:13 AM
Re: Street/Strip aftermarket block. aluminum or cast iron?	RATTRAP	04/28/20 10:42 AM
Re: Street/Strip aftermarket block. aluminum or cast iron?	TRENDZ	04/28/20 10:51 AM
Re: Street/Strip aftermarket block. aluminum or cast iron?	n20mstr	04/28/20 12:51 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	DaveRS23	04/28/20 01:25 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	challenger1320	04/28/20 02:29 PM
Re: Street/Strip aftermarket block. aluminum or cast iron?	n20mstr	04/28/20 03:45 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To