Soaked the driveshaft in evaporust, and had it powder coated a flat clear. Also put the part number stencil back on the drive shaft.
Matt

5F90E0B4-7139-403E-8AF2-F87B268886A3.jpeg9B44721D-5D18-4A62-B749-D32B3F79CB6C.jpeg4D451C3F-2810-4CCE-A204-7B0234C92FE0.jpegE4E55916-ECCE-481C-9DDC-E11BB392AFB5.jpeg