8 3/4 to a Dana - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 8 3/4 to a Dana

Print Thread

Re: 8 3/4 to a Dana [Re: an8sec70cuda] #2745361 02/22/20 01:05 AM 02/22/20 01:05 AM
Joined: Jan 2003 Posts: 8,016 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,016 Polson, MT	All else being equal, a 35 spline S-60 with a traction differential is 50 lbs heavier than a 30 spline 8 3/4" with a traction differential. Contact info

Entire Thread
Subject	Posted By	Posted
8 3/4 to a Dana	Stroker Scamp	02/19/20 05:51 AM
Re: 8 3/4 to a Dana	CSK	02/19/20 06:13 AM
Re: 8 3/4 to a Dana	DusterKid	02/19/20 12:21 PM
Re: 8 3/4 to a Dana	an8sec70cuda	02/19/20 01:09 PM
Re: 8 3/4 to a Dana	John_Kunkel	02/19/20 06:26 PM
Re: 8 3/4 to a Dana	an8sec70cuda	02/20/20 12:53 PM
Re: 8 3/4 to a Dana	DoctorDiff	02/22/20 05:05 AM
Re: 8 3/4 to a Dana	J_BODY	02/22/20 02:33 PM
Re: 8 3/4 to a Dana	polyspheric	02/19/20 01:41 PM
Re: 8 3/4 to a Dana	hemi-itis	02/19/20 02:16 PM
Re: 8 3/4 to a Dana	340Cuda	02/19/20 02:19 PM
Re: 8 3/4 to a Dana	polyspheric	02/19/20 05:10 PM
Re: 8 3/4 to a Dana	MadMopars	02/19/20 05:28 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1