8 3/4 to a Dana - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 8 3/4 to a Dana

Print Thread

Re: 8 3/4 to a Dana [Re: 340Cuda] #2744596 02/19/20 01:10 PM 02/19/20 01:10 PM
Joined: Oct 2007 Posts: 4,213 New York polyspheric master
polyspheric master Joined: Oct 2007 Posts: 4,213 New York	IIRC a test was run with an 8-3/4 vs. 60, and the ET was really close. The extra efficiency almost exactly made up for the extra 75 lb. weight gain. IDR anything easy that saves weight on the Dana, though. Smaller brakes? Boffin Emeritus

Entire Thread
Subject	Posted By	Posted
8 3/4 to a Dana	Stroker Scamp	02/19/20 05:51 AM
Re: 8 3/4 to a Dana	CSK	02/19/20 06:13 AM
Re: 8 3/4 to a Dana	DusterKid	02/19/20 12:21 PM
Re: 8 3/4 to a Dana	an8sec70cuda	02/19/20 01:09 PM
Re: 8 3/4 to a Dana	John_Kunkel	02/19/20 06:26 PM
Re: 8 3/4 to a Dana	an8sec70cuda	02/20/20 12:53 PM
Re: 8 3/4 to a Dana	DoctorDiff	02/22/20 05:05 AM
Re: 8 3/4 to a Dana	J_BODY	02/22/20 02:33 PM
Re: 8 3/4 to a Dana	polyspheric	02/19/20 01:41 PM
Re: 8 3/4 to a Dana	hemi-itis	02/19/20 02:16 PM
Re: 8 3/4 to a Dana	340Cuda	02/19/20 02:19 PM
Re: 8 3/4 to a Dana	polyspheric	02/19/20 05:10 PM
Re: 8 3/4 to a Dana	MadMopars	02/19/20 05:28 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1