8 3/4 to a Dana - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 8 3/4 to a Dana

Print Thread

8 3/4 to a Dana #2744472 02/19/20 01:51 AM 02/19/20 01:51 AM
Joined: Nov 2004 Posts: 3,518 pacific northwest S Stroker Scamp OP master
Stroker Scamp OP master S Joined: Nov 2004 Posts: 3,518 pacific northwest	I am going to order up a Dana 60 for the Scamp I am assuming will need to get a new drive shaft? Info appreciated footbrake N/A SB 408 Scamp 10.10 @ 132 street/strip 73 Duster 340 street strip 12.79 @ 105

Entire Thread
Subject	Posted By	Posted
8 3/4 to a Dana	Stroker Scamp	02/19/20 05:51 AM
Re: 8 3/4 to a Dana	CSK	02/19/20 06:13 AM
Re: 8 3/4 to a Dana	DusterKid	02/19/20 12:21 PM
Re: 8 3/4 to a Dana	an8sec70cuda	02/19/20 01:09 PM
Re: 8 3/4 to a Dana	John_Kunkel	02/19/20 06:26 PM
Re: 8 3/4 to a Dana	an8sec70cuda	02/20/20 12:53 PM
Re: 8 3/4 to a Dana	DoctorDiff	02/22/20 05:05 AM
Re: 8 3/4 to a Dana	J_BODY	02/22/20 02:33 PM
Re: 8 3/4 to a Dana	polyspheric	02/19/20 01:41 PM
Re: 8 3/4 to a Dana	hemi-itis	02/19/20 02:16 PM
Re: 8 3/4 to a Dana	340Cuda	02/19/20 02:19 PM
Re: 8 3/4 to a Dana	polyspheric	02/19/20 05:10 PM
Re: 8 3/4 to a Dana	MadMopars	02/19/20 05:28 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1