Losing power to coil “start” and “run”

Print Thread

Re: Losing power to coil “start” and “run” [Re: lostdog] #2717039 11/18/19 09:05 AM 11/18/19 09:05 AM
Joined: May 2019 Posts: 6,258 nowhere S Sniper master
Sniper master S Joined: May 2019 Posts: 6,258 nowhere	the run circuit cuts off in start mode, that is normal. You need to run another line from the start terminal to teh other side of the ballast to bypass it and put full battery voltage at the coil + in start only. Then it will work

Entire Thread
Subject	Posted By	Posted
Losing power to coil “start” and “run”	lostdog	11/18/19 03:36 AM
Re: Losing power to coil “start” and “run”	stumpy	11/18/19 04:33 AM
Re: Losing power to coil “start” and “run”	lostdog	11/18/19 04:46 AM
Re: Losing power to coil “start” and “run”	Sniper	11/18/19 01:05 PM
Re: Losing power to coil “start” and “run”	lostdog	11/18/19 01:28 PM
Re: Losing power to coil “start” and “run”	Sniper	11/18/19 01:44 PM
Re: Losing power to coil “start” and “run”	lostdog	11/18/19 01:59 PM
Re: Losing power to coil “start” and “run”	Sniper	11/18/19 02:16 PM
Re: Losing power to coil “start” and “run”	stumpy	11/18/19 05:20 PM
Re: Losing power to coil “start” and “run”	lostdog	11/18/19 08:44 PM
Re: Losing power to coil “start” and “run”	lostdog	11/18/19 05:47 PM
Re: Losing power to coil “start” and “run”	Mattax	11/18/19 09:25 PM
Re: Losing power to coil “start” and “run”	Mattax	11/18/19 09:40 PM
Re: Losing power to coil “start” and “run”	NachoRT74	11/18/19 11:43 PM
Re: Losing power to coil “start” and “run”	lostdog	11/24/19 11:11 PM
Re: Losing power to coil “start” and “run”	RapidRobert	11/18/19 07:28 PM
Re: Losing power to coil “start” and “run”	lostdog	11/18/19 08:47 PM

Hop To