|
Re: 904 Transmission ..(suite..)
[Re: HotRodDave]
#270896
03/31/09 08:29 PM
03/31/09 08:29 PM
|
Joined: May 2004
Posts: 1,522 Ste-Sophie, Quebec, Canada
Wedgeman
OP
pro stock
|
OP
pro stock
Joined: May 2004
Posts: 1,522
Ste-Sophie, Quebec, Canada
|
Quote:
there should be at least 2 snap rings, one above the clutch pack and one below it. Sometimes they put a flat one against the wavey one so there could be 3 in one clutch pack.
The 82+ trans should have all the good stuff, 5 clutches, heavy duty steel low gear ratio planataries, and LU. When I build a trans for myself this is the one I look for. If you are going to run it behind an externally balanced 360 you can get weights from mopar to weld on the converter or you can order a converter from an aftermarket suplier that has whatever stall speed you want and has the weights on it, or you can get a BnM flex plate with the weights on it or you can order a LU 360 converter from most local parts supliers.
Whoa !.....let me get this straight ! lolll
I have to get weight to balance the converter...balance it with what ??? the crank ???? I have to take the crank out to balance it ??? i'm very confused on that.....please be very specific because I'm totally lost there Dave..
Daniel
|
|
|
|
|
|