Originally Posted by Cab_Burge
Originally Posted by 493_DART
Originally Posted by firefighter3931
Try reversing the pickup wires. I had a similar problem in the past nd the car wouldn't even fire until I reversed the pickup wires.


Ron


the plug and dist. wiring havent changed at all since it ran .

Something has changed or it would still run, correct work
I would be checking the grounds with a ohm meter between the ECU, coil resistor and the distributor housing and block scope twocents


ill go over grounds with the meter 1 more time...i know the block was good--and i had a direct ground from Batt to Ecu...

ill check wiring again but i had 12v everywhere it should be-----