Originally Posted by larrymopar360
it appears the top comes all the over the sides and fits fully against the bottom plate, leaving nothing open to the element.


Here's your issue.

The filter must be tall enough to allow air to enter under the cover.
Thus you will "hear" air being pulled in.

You can get the same affect by using too tall of a filter in a regular housing and it will be unsilenced at the top.
We did this a lot way back when.
Will flow all the air you need, as the can and filter are much larger.

I dig where your going with this.
Super kool on da truck.

Last edited by bboogieart; 10/02/19 03:39 PM.
I have mechanical Aptitude.
I can screw up anything.