Do these bore #'s look good? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Do these bore #'s look good?

Print Thread

Re: Do these bore #'s look good? [Re: hudsonhornet7x] #2682820 07/30/19 07:10 PM 07/30/19 07:10 PM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	Absolutely not good numbers at all. Either they are fake, or someone doesnt know how to calibrate their sonic tester. You first do whats called a " probe zero", then you calibrate it to a known and measurable thickness. RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Entire Thread
Subject	Posted By	Posted
Do these bore #'s look good?	hudsonhornet7x	07/30/19 02:32 AM
Re: Do these bore #'s look good?	Cab_Burge	07/30/19 02:57 AM
Re: Do these bore #'s look good?	hudsonhornet7x	07/30/19 03:04 AM
Re: Do these bore #'s look good?	Chargerfan68	07/30/19 04:38 AM
Re: Do these bore #'s look good?	A727Tflite	07/30/19 05:49 AM
Re: Do these bore #'s look good?	hemienvy	07/30/19 01:13 PM
Re: Do these bore #'s look good?	ZIPPY	07/30/19 01:44 PM
Re: Do these bore #'s look good?	Ray408G3Hemi	07/30/19 01:58 PM
Re: Do these bore #'s look good?	gregsdart	07/30/19 02:08 PM
Re: Do these bore #'s look good?	merpar	07/30/19 02:13 PM
Re: Do these bore #'s look good?	lewtot184	07/30/19 03:37 PM
Re: Do these bore #'s look good?	GTS340	07/30/19 03:54 PM
Re: Do these bore #'s look good?	hudsonhornet7x	07/30/19 03:59 PM
Re: Do these bore #'s look good?	Cab_Burge	07/30/19 04:39 PM
Re: Do these bore #'s look good?	ZIPPY	07/30/19 05:00 PM
Re: Do these bore #'s look good?	CompWedgeEngines	07/30/19 11:10 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1