Do these bore #'s look good? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Do these bore #'s look good?

Print Thread

Re: Do these bore #'s look good? [Re: lewtot184] #2682682 07/30/19 11:54 AM 07/30/19 11:54 AM
Joined: Dec 2013 Posts: 403 Romulus, MI GTS340 mopar
GTS340 mopar Joined: Dec 2013 Posts: 403 Romulus, MI	Something is not right, the theoretical max wall thickness between 2 adjacent cylinders would be .458 if siamese, the sum of the wall thicknesses on several adjacent cylinders is higher than .458

Entire Thread
Subject	Posted By	Posted
Do these bore #'s look good?	hudsonhornet7x	07/30/19 02:32 AM
Re: Do these bore #'s look good?	Cab_Burge	07/30/19 02:57 AM
Re: Do these bore #'s look good?	hudsonhornet7x	07/30/19 03:04 AM
Re: Do these bore #'s look good?	Chargerfan68	07/30/19 04:38 AM
Re: Do these bore #'s look good?	A727Tflite	07/30/19 05:49 AM
Re: Do these bore #'s look good?	hemienvy	07/30/19 01:13 PM
Re: Do these bore #'s look good?	ZIPPY	07/30/19 01:44 PM
Re: Do these bore #'s look good?	Ray408G3Hemi	07/30/19 01:58 PM
Re: Do these bore #'s look good?	gregsdart	07/30/19 02:08 PM
Re: Do these bore #'s look good?	merpar	07/30/19 02:13 PM
Re: Do these bore #'s look good?	lewtot184	07/30/19 03:37 PM
Re: Do these bore #'s look good?	GTS340	07/30/19 03:54 PM
Re: Do these bore #'s look good?	hudsonhornet7x	07/30/19 03:59 PM
Re: Do these bore #'s look good?	Cab_Burge	07/30/19 04:39 PM
Re: Do these bore #'s look good?	ZIPPY	07/30/19 05:00 PM
Re: Do these bore #'s look good?	CompWedgeEngines	07/30/19 11:10 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1