[quote=ZIPPY]Tex or anyone,

Any noticeable change in oil temperature (if it is being monitored)?


Zippy , I do not run a oil temp gauge . I only monitor it off oil pressure , as motor warms up . Does not seem more than 5 psi variation hot or cold , idle and above 3500 . Between these it is down a little but still running 40psi . But that may be the constant top end oiling , even with the World restrictors fitted . And I swapped mechanical gauges , and used braided -4 line , just before fitting the World . Old 440 IIRC read similar . I do run the large Milodon road/race pan . Currently Brad Penn 20/50 , will go to Royal Purple 20/50 in a couple of months . That is what I ran in the old motors .

Tex


New best ET 10.259@129.65 .
New best MPH 130.32
Finally fitted a solid cam,
stepped it up a bit more
3690lbs through the mufflers
New World block 3780lbs 10.278@130.80 . Wowser 10.253@130.24 footbraking from 1500rpm
Power by Tex's Automotive