YES, perfect!
This is exactly the sort of information I'm curious about, especially the theory behind things like the nose duration, etc.
So given that I picked up a custom ground CompCams hydraulic roller (thus my focus on the CompCams parts, not meaning to ignore the other guys) I actually reached out to their tech folks and asked for the grind card, which they shared. The cam has the 13084 & 3039 lobes, these are the Xtreme Energy XFI rollers:
Lobe 13084:
.006 dur is 290
.050 dur is 240
.200 dur is 163
Lobe 3039:
.006 dur is 300
.050 dur is 248
.200 dur is 169
Now, if I had that same info available for the other grinds I would have happily posted those as well, alas, I do not.