Aluminum Cylinder Head Clearance

Print Thread

Re: Aluminum Cylinder Head Clearance [Re: MarkZ] #2676868 07/12/19 04:59 PM 07/12/19 04:59 PM
Joined: Mar 2010 Posts: 1,061 Atlanta, GA M mgoblue9798 super stock
mgoblue9798 super stock M Joined: Mar 2010 Posts: 1,061 Atlanta, GA	Get a bar of soap and rub it on whatever cutting tool you use. I will help prevent the aluminum from loading up. This bit in a die grinder would make short work of it. Remember to duct tape over the distributor hole before starting. https://www.amazon.com/TEMO-Aluminum-CARBIDE-Cylinder-Diameter/dp/B00385NKW4 Last edited by mgoblue9798; 07/12/19 05:00 PM.

Entire Thread
Subject	Posted By	Posted
Aluminum Cylinder Head Clearance	MarkZ	07/11/19 03:21 PM
Re: Aluminum Cylinder Head Clearance	Neil	07/11/19 03:25 PM
Re: Aluminum Cylinder Head Clearance	SportF	07/11/19 03:51 PM
Re: Aluminum Cylinder Head Clearance	dvw	07/11/19 04:36 PM
Re: Aluminum Cylinder Head Clearance	AndyF	07/11/19 07:38 PM
Re: Aluminum Cylinder Head Clearance	Iowan	07/12/19 02:56 AM
Re: Aluminum Cylinder Head Clearance	AndyF	07/12/19 05:08 AM
Re: Aluminum Cylinder Head Clearance	Sniper	07/12/19 11:37 AM
Re: Aluminum Cylinder Head Clearance	MarkZ	07/12/19 12:28 PM
Re: Aluminum Cylinder Head Clearance	krautrock	07/12/19 03:18 PM
Re: Aluminum Cylinder Head Clearance	AndyF	07/12/19 11:43 PM
Re: Aluminum Cylinder Head Clearance	383man	07/13/19 04:39 AM
Re: Aluminum Cylinder Head Clearance	MarkZ	07/20/19 08:44 PM
Re: Aluminum Cylinder Head Clearance	MarkZ	07/21/19 07:53 PM
Re: Aluminum Cylinder Head Clearance	451Mopar	07/21/19 09:52 PM
Re: Aluminum Cylinder Head Clearance	451Mopar	07/12/19 03:12 PM
Re: Aluminum Cylinder Head Clearance	mgoblue9798	07/12/19 08:59 PM

Hop To