I wonder how good the Magnum Force double-tubular SFCs are. Would they be better or as good as the typical 2x2 square SFC?
Despite all the suspension mods I've done (per allowable SCCA E/Street Prepared rules, one thing I've never gotten around to adding are SFCs. In the past, SCCA would not allow SFCs to be welded-in... they could only be bolted-in. Years later, the SCCA later allowed SFCs to be welded in, but only at two-points (front and rear).
I plan to add them sooner or later... after the new engine gets going.. maybe in 2020.
Last edited by Mopar Mitch; 07/08/19 03:17 PM.