Motor plate or Solid Mounts?

Print Thread

Re: Motor plate or Solid Mounts? [Re: Jeremiah] #2669860 06/25/19 05:43 PM 06/25/19 05:43 PM
Joined: Mar 2009 Posts: 2,490 Sydney,Australia tex013 top fuel
tex013 top fuel Joined: Mar 2009 Posts: 2,490 Sydney,Australia	I ran the Schumakers for a few years , then they melted and collapsed I now have the bolt through type , Mancini and 440 Source sell them https://www.manciniracing.com/maheduenmo.html PLUS I use a torque strap from K fram to motor mount bracket on block https://www.alllifting.com.au/colle...products/rated-rigging-screw-jaw-and-jaw No dramas for the last year or so . I do run a transbrake . Not sure I want to go to a plate for daily street use . Tex New best ET 10.259@129.65 . New best MPH 130.32 Finally fitted a solid cam, stepped it up a bit more 3690lbs through the mufflers New World block 3780lbs 10.278@130.80 . Wowser 10.253@130.24 footbraking from 1500rpm Power by Tex's Automotive

Entire Thread
Subject	Posted By	Posted
Motor plate or Solid Mounts?	Chargerfan68	06/25/19 07:38 PM
Re: Motor plate or Solid Mounts?	AndyF	06/25/19 07:47 PM
Re: Motor plate or Solid Mounts?	rickseeman	06/25/19 08:52 PM
Re: Motor plate or Solid Mounts?	Dragula	06/25/19 09:21 PM
Re: Motor plate or Solid Mounts?	Jeremiah	06/25/19 09:36 PM
Re: Motor plate or Solid Mounts?	tex013	06/25/19 09:43 PM
Re: Motor plate or Solid Mounts?	MR_P_BODY	06/25/19 10:07 PM
Re: Motor plate or Solid Mounts?	hemi-itis	06/26/19 03:23 AM
Re: Motor plate or Solid Mounts?	an8sec70cuda	06/26/19 12:24 PM
Re: Motor plate or Solid Mounts?	hemi-itis	06/26/19 01:41 PM
Re: Motor plate or Solid Mounts?	383man	06/26/19 02:35 PM
Re: Motor plate or Solid Mounts?	B1MAXX	06/26/19 04:17 PM
Re: Motor plate or Solid Mounts?	rickseeman	06/26/19 07:14 PM

Hop To