Originally Posted by Cab_Burge
Originally Posted by Get-X
Originally Posted by madscientist
CSK nailed it. Stop screwing around and call Mike. You'll be glad you did. I can't see the pictures, but unless the sweep is .040 or a bit less, you need to fix the geometry. Centering the sweep if it's .080 or more wide doesn't mean a thing.


Who's "screwing around"?? I spoke with Mike over a week ago and we had a very long discussion about this and lots of other things. He's a great guy and I really appreciated his time. That being said, I'll mock things up and look at them myself before I make any decisions. The scrub was .037 wide, .123 from the ex. side of the valve to .183 from the int. side on a .343 o.d. valve.

I'm glad to see others on here not drinking the cool aid on the rocker arm tip shrub patterns having to be no wider than .030 directly centered on the valve stem bow work up
if it is centered, or almost centered and .060 wide I'll run that in a heartbeat up


.060 is too wide. Why leave it like that when it's fixable?

Just because you think it won't make it true. Horsepower is KING. To dispute this is stupid. C. Alston