Scrub from HS rockers on TrickFlow heads

Print Thread

Re: Scrub from HS rockers on TrickFlow heads [Re: Get-X] #2648331 04/24/19 01:22 AM 04/24/19 01:22 AM
Joined: Jan 2003 Posts: 31,074 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,074 Oregon	If the pattern looks good to you then run it. You shouldn't have any issue at 0.600 lift. I never needed anything special on any of the Trick Flow dyno motors I built and I ran most of them at 0.750 lift.

Entire Thread
Subject	Posted By	Posted
Scrub from HS rockers on TrickFlow heads	Get-X	04/24/19 02:27 AM
Re: Scrub from HS rockers on TrickFlow heads	Get-X	04/24/19 02:30 AM
Re: Scrub from HS rockers on TrickFlow heads	CSK	04/24/19 03:00 AM
Re: Scrub from HS rockers on TrickFlow heads	madscientist	04/24/19 03:23 AM
Re: Scrub from HS rockers on TrickFlow heads	Get-X	04/24/19 04:42 AM
Re: Scrub from HS rockers on TrickFlow heads	AndyF	04/24/19 05:22 AM
Re: Scrub from HS rockers on TrickFlow heads	Cab_Burge	04/24/19 03:44 PM
Re: Scrub from HS rockers on TrickFlow heads	madscientist	04/24/19 04:05 PM
Re: Scrub from HS rockers on TrickFlow heads	madscientist	04/24/19 04:05 PM
Re: Scrub from HS rockers on TrickFlow heads	Get-X	04/24/19 05:27 PM
Re: Scrub from HS rockers on TrickFlow heads	polyspheric	04/24/19 11:54 PM
Re: Scrub from HS rockers on TrickFlow heads	1KoolBee	05/03/19 01:30 AM
Re: Scrub from HS rockers on TrickFlow heads	Get-X	05/06/19 05:14 PM
Re: Scrub from HS rockers on TrickFlow heads	1KoolBee	05/10/19 02:40 AM

Hop To