Street stroker quench ??

Print Thread

Re: Street stroker quench ?? [Re: 451Mopar] #2643392 04/09/19 07:42 PM 04/09/19 07:42 PM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	I think even with piston rock you will have 0.030" min clearance. That should be OK with steel rods and 6,000 RPM. I know 0.020" is too tight on a 440, but the engine ran for quite some time until it was over-reved.

Entire Thread
Subject	Posted By	Posted
Street stroker quench ??	Stanton	04/08/19 09:33 PM
Re: Street stroker quench ??	HotRodDave	04/08/19 10:42 PM
Re: Street stroker quench ??	ZIPPY	04/08/19 10:51 PM
Re: Street stroker quench ??	AndyF	04/08/19 11:10 PM
Re: Street stroker quench ??	CSK	04/08/19 11:40 PM
Re: Street stroker quench ??	Stanton	04/09/19 02:40 AM
Re: Street stroker quench ??	tex013	04/09/19 02:47 AM
Re: Street stroker quench ??	AndyF	04/09/19 04:41 AM
Re: Street stroker quench ??	MR_P_BODY	04/09/19 05:24 AM
Re: Street stroker quench ??	383man	04/13/19 03:43 PM
Re: Street stroker quench ??	viperblue72	04/13/19 06:55 PM
Re: Street stroker quench ??	Stanton	04/13/19 07:42 PM
Re: Street stroker quench ??	Cab_Burge	04/14/19 12:57 AM
Re: Street stroker quench ??	Stanton	04/14/19 01:36 PM
Re: Street stroker quench ??	Cab_Burge	04/14/19 05:37 PM
Re: Street stroker quench ??	Cab_Burge	04/09/19 07:17 AM
Re: Street stroker quench ??	sasquatch	04/09/19 07:23 AM
Re: Street stroker quench ??	Stanton	04/09/19 01:48 PM
Re: Street stroker quench ??	bobby66	04/09/19 02:15 PM
Re: Street stroker quench ??	Stanton	04/09/19 03:39 PM
Re: Street stroker quench ??	fast68plymouth	04/09/19 04:58 PM
Re: Street stroker quench ??	AndyF	04/09/19 10:57 PM
Re: Street stroker quench ??	451Mopar	04/09/19 03:10 AM
Re: Street stroker quench ??	451Mopar	04/09/19 11:42 PM
Re: Street stroker quench ??	Bad340fish	04/10/19 12:53 AM
Re: Street stroker quench ??	dogdays	04/12/19 05:02 AM
Re: Street stroker quench ??	HardcoreB	04/09/19 02:14 PM
Re: Street stroker quench ??	mopar dave	04/11/19 04:13 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To