I used to run dual 750 cfm (Eddy 1407's, I think was the number) on my Hemi. Yes, they were rich to start but after playing with the metering rods and jetting 4 or 5 times It ran flawlessly, started right up, idled fine and was not too rich on the street. Hemi's like cfm.
Thanks. I have ordered the Edelbrock calubrating kit, is suppose to be here today. I'm going to start by changing the metering rods to same as the Edelbrocks set up on the carbs they sell "specifically" for a 2 4 set up. I will keep every one advised how it wotks. If that doesn't work, I wii go to the jets.
